TripleA Robotics is one of the many that provides high-end Automatic Tool Change for Collaborative Robots (Cobots) in Singapore

Triple A Robotics – WINGMAN Collaborative Robot Tool Changer System

With automatic tool change, your cobot will have the flexibility to deploy more tools, solve more tasks and generate more output in your production. The WINGMAN Cobot Tool Changer system is installed and ready for automatic & manual tool change in a few minutes Plug and Play. The WINGMAN is an affordable and highly adaptable automatic tool change solution that provides an ROI of down to only a few weeks. The WINGMAN is a New School tool changer that offers both manual and automatic tool change in the same device. In addition, the WINGMAN does not require expensive pneumatic installations to achieve automatic tool change, unlike Old School automatic tool changers. All this is possible thanks to WINGMAN’s patented mechanical redundant locking mechanism.

Category:
Download brochure Request for Quote
5/5 - (5 votes)

Introducing Wingman Cobot Tool Changer System

The Tool Changer

Suitable for use on cobots of all sizes and will fit in applications with only a little space.

Combined height: 30 mm / 1.18 in

Combined weight: 260 g / 0.57 lbs

Rated payload: 33 kg / 73 lbs

Repeatability: +-0,03 mm / 0.0012 in

The Tool Holder

The holder provides a standard solution to store end-effectors and the holder is part of the automatic.

Holder’s maximum payload: 5 kg / 11 lbs

Maximum tool imbalance: 1 Nm

Material: Stainless steel

High Quality

The WINGMAN Tool Changer System is made of precision machined metal parts.

Manufacturing country: DENMARK

Material: High-grade aluminium

Surface treatment: Special

High Flow Pass-Through Module

The modules click on the WINGMAN’s housing without the use of tools. The WINGMAN can hold three sets of modules.

Maximum pressure: 10 bar

Push-in fittings: 2 x Ø6 mm hoses

Pass-through clearance: Ø4 mm

Built-in Air Pass-Through

The WINGMAN Tool Changer housings feature built-in channels for pneumatic pass-through.

Maximum pressure: 10 bar

Channels for fittings: 2 x Ø4 mm hoses

Pass-through clearance: Ø 2,7 mm

Electrical Pass-Through Module

The modules click on the WINGMAN’s housing without the use of tools. There is room for three sets of modules, which allow for three different sources of electrical power/control.

Connectors: Std. cobot M8 / 8 pin

Rated voltage/amps: 30 ACDC / 1,5 A

IP classification: IP54