Skip to main content

UPS Power Protection for Critical Loads

Match the UPS design to how critical your load is. We help facilities compare online double conversion and line-interactive UPS systems, so servers, networks, security systems and industrial equipment keep running through outages and power disturbances.

How power moves through each UPS designIn an online double conversion UPS, mains power passes through a rectifier and an inverter to the load, with the battery on the DC link. In a line-interactive UPS, mains power reaches the load through the inverter and voltage boost circuitry, and the unit switches to battery when mains power fails.Online double conversionPower always passes through the unitMainsRectifierInverterLoadBatteryLine-interactiveSwitches to battery when mains power failsMainsInverter and voltage boostfiltering and regulationLoadBattery
0 ms transferOnline double conversion
4-6 ms transferLine-interactive, on switching to battery
Below 5000VATypical line-interactive rackmount use
Frequency regulationOnline systems help stabilise generator start-up

Why a brief power loss is never brief

Alternating current (AC) power is generated as a stable and clean resource, but transmission and distribution expose it to voltage sags, spikes and total failures. Choosing the right UPS is essential for operational continuity.

Interrupted operations

Voltage sags, spikes and total failures can interrupt operations.

Permanent data loss

Irregularities in the supply can cause permanent data loss.

Damaged equipment

Power irregularities can damage sensitive equipment.

What a UPS protects

A UPS provides instantaneous backup power, so essential systems continue running during outages.

Servers and data systems

Essential IT systems keep running when mains power is lost.

Networking devices

Network equipment stays powered during an outage.

Security and surveillance systems

Surveillance and security systems stay powered during an outage.

Industrial and operational equipment

Industrial and operational equipment stays powered during an outage.

Online double conversion vs line-interactive

UPS systems are defined mainly by how power moves through the unit. These are the two leading configurations.

Online double conversionLine-interactive
How it operatesA rectifier converts incoming AC to DC, then an inverter converts it back to AC. This design isolates the connected load from irregularities in the mains supply.The inverter is always on and connected to the output. On normal input it runs in reverse to charge the battery while filtering and regulating. When power fails, a transfer switch opens and the battery feeds the output.
Transfer timeZero. Power runs through the unit continually, feeding both the battery and the load, so no transfer switch is needed.A brief 4-6 millisecond break in power when it switches to battery.
Power conditioningThe unit regenerates the electrical sine wave. This provides continuous conditioning and helps protect equipment from harmonics, waveform distortion, blackouts, brownouts and noise interference.Voltage boost circuitry corrects under-voltage and over-voltage, supporting a wide range of input fluctuation before switching to battery.
Battery useIf the mains input fails, the batteries keep power flowing with zero millisecond transfer time.It relies on the battery to condition power during fluctuations, so it tends to drain its batteries more often than an online system.
Best suited toCritical IT networks and large data centres, where it offers the higher level of protection of the two configurations.Rackmount applications typically below 5000VA, where complete outages are rare but fluctuations are common. It balances reasonable protection against moderate operating cost.

Choosing between them

The right power protection strategy depends on how critical the connected loads are and on your facility’s electrical environment.

Whether you need the zero transfer time of double conversion or the cost-effective voltage regulation of a line-interactive unit, assessing your power architecture is the first step towards operational resilience. At LKH Precicon, we help facilities work through that assessment.

The hidden threat to your production: voltage sags

Total power blackouts make the headlines, but they aren’t your biggest operational threat. Over 90% of all power quality events are voltage sags (dips): sudden, brief drops in power that often last less than a single second.

Whether caused by weather, grid instability, or heavy machinery starting up on your own factory floor, these split-second anomalies have devastating impacts on sensitive automated equipment.

Scrapped materials

A millisecond voltage drop can halt an injection moulder or semiconductor tool mid-process, instantly ruining entire batches of expensive material.

Extensive downtime

When a voltage sag trips a Programmable Logic Controller (PLC), robotics system, or variable frequency drive (VFD), it can take hours to clear faults, reset machinery, and recalibrate lines.

Equipment degradation

Sudden power drops and the subsequent inrush of current when voltage normalises cause severe wear and tear on sensitive electronic hardware.

Premature UPS battery failure

If you rely on a standard Uninterruptible Power Supply (UPS) to handle every minor sag, your batteries are constantly micro-cycling, cutting their lifespan in half and skyrocketing your maintenance costs.

What is a DySC (Dynamic Sag Corrector)?

Dynamic Sag Correctors (DySC) are a unique and exclusive industrial power quality solution. Each DySC uses patented double conversion inverter technology that protects against the voltage sags and momentary outages that account for much manufacturing downtime.

  • Protects against short-term sags and interruptions that can impact production
  • Machine to facility-wide protection
  • Single- and three-phase products
  • Up to 5 seconds of ride through
  • Battery-free solution: eliminates the requirement to swap batteries every 3-5 years

How DySC works: instant, battery-free correction

When a voltage sag hits your facility, the DySC reacts faster than the blink of an eye to protect your load. This is the process, step by step.

1. Ultra-fast detection and isolation (<0.7 ms)

High-speed sensors detect a voltage anomaly in less than 1/10th of an electrical cycle. Instantly, an internal Static Switch (SCR) opens to isolate your critical equipment from the unstable grid.

2. Battery-free energy harvesting

Instead of draining a battery, the DySC’s Power Matrix actively harvests residual energy directly from the remaining grid voltage.

3. Perfect sine-wave reconstruction

The Double Conversion Power Core (using an advanced Rectifier and Inverter) takes that harvested energy and instantly injects a compensating voltage. It reconstructs a flawless, stable sine-wave for your equipment to use.

Why upgrade to DySC with LKH Precicon?

SEMI F47 compliance guaranteed

Instantly elevate legacy tools and highly sensitive semiconductor manufacturing equipment to meet stringent SEMI F47 voltage sag immunity standards.

Zero battery maintenance

Eliminate the hazardous waste, cooling requirements, and constant replacement costs associated with traditional lead-acid or lithium-ion batteries.

Over 99% energy efficiency

The solid-state design ensures maximum operational efficiency, saving thousands in electrical overhead compared to a standard UPS.

The ultimate hybrid architecture (UPS + DySC)

By placing a DySC upstream of your existing UPS, the DySC handles all the daily “noise” and voltage sags. Your UPS batteries are preserved exclusively for rare, total blackouts, often doubling or tripling their lifespan.

Secure your facility’s uptime today

You cannot fix what you do not measure. At LKH Precicon, we deploy advanced Power Quality Analyzers to audit your grid, capture your exact voltage anomalies, and engineer the precise DySC solution to bridge your vulnerabilities.

Stop letting split-second power sags dictate your production schedule. Contact us to find out more details and arrange a comprehensive power audit. You can also explore our power quality management solutions.

Frequently asked questions

Which UPS type suits a critical IT load?

For critical IT networks and large data centres, online double conversion offers the higher level of protection of the two configurations. Incoming power is converted to DC and back to AC, which isolates the connected load from irregularities in the mains supply.

What is the difference between online double conversion and line-interactive UPS?

An online double conversion UPS converts incoming AC to DC and back to AC continuously, so there is zero transfer time and the load is isolated from mains irregularities. A line-interactive UPS keeps its inverter connected to the output and uses voltage boost circuitry to correct fluctuations, with a 4-6 millisecond transfer to battery when power fails.

How long is the transfer time of a line-interactive UPS?

When a line-interactive system switches to battery, there is a brief 4-6 millisecond break in power. Because it relies on the battery to condition power during fluctuations, it tends to drain its batteries more often than an online system.

Where are line-interactive UPS systems typically used?

Line-interactive systems are typically used in rackmount applications below 5000VA, particularly where complete outages are rare but power fluctuations are common.

Which UPS type works with a backup generator?

Online systems provide frequency regulation, which helps stabilise the variations commonly seen when a backup generator starts up.

Find the right UPS for your facility

Tell us about your load and site, and our engineering team will get back to you.