[22 – 23 Feb 2024] Programming IO-Link Smart Devices (IEC61131-9)

5/5 - (11 votes)
Participants will learn how to program the PLC using IEC61131-3 standard and interface with the IO Link Master using the Ethercat protocol to retrieve the sensor status and control the actuators. They will also learn how to program the HMI to do graphical display of the sensor status and even learn to control the actuators with a click of a button.

Keep up with Industry 4.0 through our
Short Learning Courses

Offered by School of Engineering

Short Course / 2 Days / TGS-2020509086

LKH Precicon Pte Ltd is supporting Ngee Ann Polytechnic in the effort to promote short courses to transform our workforce towards Industry 4.0.

IO-Link: The road to smart maintenance & cost saving cabling

Participants will learn how to program IO-Link Smart Devices using IEC61131-9 standard and interface with the IO-Link Master using the Ethercat protocol to retrieve the sensor status and control the actuators.
They will also learn how to program the HMI to do a graphical display of the sensor status and even learn to control the actuators with a click of a button.

Course Schedule

Date: 22 February 2024 – 23 February 2024

(2 Days Course)

Time: 9:00 am to 6:00 pm

Delivery Mode: Classroom

Venue: Ngee Ann Polytechnic

Application Period: 24 December 2023 – 4 February 2024

*This course may be conducted online subject to Covid-19 guidelines.

*Ngee Ann Polytechnic reserves the right to reschedule/cancel any programme, modify the fees and amend the information without prior notice.

Lesson Plan

Introduction to IO-Link Technology (2 hrs)

  • Difference between traditional sensors/actuators vs IO-Link Sensors/actuators
  • Configuration of IO-Link devices on PLC

Communication between the PLC and IO-Link Master (4 hrs)

  • Setup the communication interface between the PLC and IO-Link Master
  • Learn to retrieve the data from the different types of IO-Link sensors and control the actuators

Introduction to HMI programming to interface with the PLC and IO-Link Master (4 hrs)

  • Basics of HMI Programming i.e creating I/O controls and etc and learn to interface with the PLC and IO-Link Master
  • Learn how to create the necessary control of the IO-Link actuators and display of IO-Link sensor values (Process Data) using the HMI
Case studies with assessment (4 hrs)
  • Case Study (work)

Course Fees

Funding period for this course is from 1 Jul 2023 to 30 Sep 2024.

SkillsFuture Credit
All Singaporeans aged 25 and above can use their $500 SkillsFuture Credit from the government to pay for a wide range of approved skills-related courses. Visit the SkillsFuture Credit website to choose from the courses available on the Training Exchange course directory.

Union Training Assistance Programme (UTAP)
NTUC members enjoy 50% unfunded course fee support for up to $250 each year (or up to $500 for NTUC members aged 40 years old and above) when you sign up for courses supported under UTAP (Union Training Assistance Programme). Please visit e2i’s website to find out more.

Enhanced training support for SMEs
For enhanced training support for SMEs, enter SME in the promo code during course application.

Long Term Visit Pass Plus (LTVP+) Holders
Please furnish the following documents to the course administrator to qualify for SSG funding:
Self-sponsored learner (**LTVP+): Copy of your green visit pass card, with the word ‘PLUS’ on the back of the card.
Co-sponsored learner (##LTVP+): Copy of valid and current Letter of Consent (LOC) from MOM

Ngee Ann Polytechnic reserves the right to reschedule/cancel any programme, modify the fees and amend the information without prior notice.

(Course fee is payable upon acceptance. It is inclusive of 8% GST and subject to review.)

Applicants / Eligibility Fees
Full Course Fee $648.00
Singaporeans aged below 40 qualified for SkillsFuture Funding* $192.60
Singaporeans aged 40 & above qualified for SkillsFuture Mid-Career Enhanced Subsidy* $72.60
Singaporeans qualified for Enhanced Training Support for SMEs* $72.60
Singapore Permanent Residents & **LTVP+ qualified for SkillsFuture Funding $194.40
Singapore Permanent Residents & ##LTVP+ qualified for Enhanced Training Support for SMEs $74.40
Others (and Repeat Students) $648.00

Certification

In-class assessments.
A Certificate of Performance will be awarded to participants who achieve at least 75% attendance and pass all required assessment(s).
A Certificate of Participation will be awarded to participants who meet the 75% attendance requirement but did not pass all required assessment(s).

Limited slots are available. Sign up now to avoid disappointment!

Register Here

Brought to you by:

Ngee Ann Polytechnic Courses